Agilent Technologies 8719D User Manual page 516

(HP 8722D) selects power range 7 when in manual power range.
(HP 8722D) selects power range 8 when in manual power range.
(HP 8722D) selects power range 9 when in manual power range.
(HP 8722D) selects power range 10 when in manual power
range.
(HP 8722D) selects power range 11 when in manual power
range.
specifies whether or not to store the raw data (ratioed and
averaged) on disk with the instrument state.
selects whether sampler and attenuator offsets are ON or OFT.
By selecting raw offsets OFT, a full two port error correction
can be performed without including the effects of the offsets
It also saves substantial time at recalls and during frequency
changes. Raw offsets follow the channel coupling. This softkey
is used with "'Ihke4" mode. See "Example 2E" in Chapter 2 of
the Programmer's Guide.
values of the active marker on a Smith chart as a real and
imaginary pair The complex data is separated into its real part
and imaginary part. The lirst marker value given is the real
part M cos 0, and the second value is the imaginary part M sin
When in the polar marker menu, ;~~~~~:, displays the
values of the active marker as a real and imaginary pair The
complex data is separated into its real part and imaginary
part. The first marker value given is the real part M cos 0,
and the second value is the imaginary part M sin 8, where
M = magnitude.
searches the directory of the disk for ilIe names recognized
as belonging to an instrument state, and displays them in the
time. If there are more than five, repeatedly pressing this key
causes the next five to be displayed. If there are fewer than
five, the remaining softkey labels are blanked.
is a disk file directory command. Pressing this softkey will read
the lirst six sequence titles and display them in the softkey
labels as described in Loading a Sequence When the Title Is
Not Known. These sequences can then be loaded into internal
memory.
sequence titles on the disk will be displayed. lb read the
contents of the disk starting again with the first sequence:
remove the disk, ,re?rt it into the drive, and press
. - i . . . . . . . . . ~ . ~ . ~ . ~ . ~ . ~ . ~ . ~ . ~ ~ . _ . > >. . . A
Key Definitions 9-36