Solving Problems With Printing Or Plotting - Agilent Technologies 8719D User Manual

Solving Problems with Printing or Plotting

If you encounter a problem when you are printing or plotting, check the following list for
possible causes:
Look in the analyzer display message area. The analyzer may show a message that will
n
identify the problem. Refer to the "Error Messages" chapter if a message appears.
If necessary, refer to the configuration procedures in this chapter to check that you have
n
done the following:
connected an interface cable between the peripheral and the analyzer
q
connected the peripheral to ac power
q
switched on the power
q
switched the peripheral
q
selected the correct printer or plotter type
q
printer may require more memory and/or the page protection activated.
Consult your printer manual for information on upgrading memory and how to
activate page protection.
Make sure that the analyzer address settii for the peripheral corresponds to the actual
n
HP-IB address of the peripheral. The procedure is explained earlier in this chapter.
Substitute the interface cable.
n
Substitute a different printer or plotter.
n
Printing, Platting, and Saving Measurement Results
on line