Agilent Technologies 8719D User Manual page 607

HP 85052C 3.5~mm TRL Calibration Kit
n
HP 85056K 2.92 * Calibration Kit
n
HP 85056A/D 2.4~mm Calibration Kit
n
HP 85036B/E 75-Ohm Type-N Calibration Kit
n
Verification Kits
Accurate operation of the analyzer system can be verified by measuring known devices other
than the standards used in calibration, and comparing the results with recorded data. The
following verification kits contain traceable precision devices used to confirm the system's
error-corrected measurement uncertainty performance. Also included is verification data on a
3.5 inch disk, together with a hard-copy listing. A system verification procedure is provided
with these kits and
also in
HP 85057B 2.4~mm Verification Kit
n
HP 85053B 3.5~mm Verification Kit
n
HP 85051B 7-mm Verification Kit
n
HP 85055A 50-Ohm Type-N Verification Kit
n
The following RF cables are used to connect a two-port device between the test ports These
cables provide shielding for high dynamic range measurements.
HP 85133C 2.4~mm Semi-Flexible Single Cable
n
HP 85133D 2.4~mm Semi-Flexible Cable Set
n
HP 85133E 2.4~mm Super-Flexible Single Cable
n
HP 85133F 2.4~mm Super-Flexible Cable Set
n
HP 85131C 3.5~mm Semi-Flexible Single Cable
n
HP 85131D 3.5~mm Semi-Flexible Cable Set
n
HP 85131E 3.5~mm Super-Flexible Single Cable
n
HP 85131F 3.5~mm Super-Flexible Cable Set
n
HP 85132C 7-mm Semi-Flexible Siie Cable
n
HP 851321) 7-mm Semi-Flexible Cable Set
n
HP 85132E 7-mm Super-Flexible Single Cable
n
HP 85132F 7-mm Super-Flexible Cable Set
n
the
HP 8719D/ZOD/ZZD Network Anulgzer Semrice Guide.