Analyzer Display
Figure 1-2. Analyzer Display (Single Channel, Cartesian Format)
The analyzer display shows various measurement information:
The currently selected measurement parameters.
n
Figure 1-2 illustrates the locations of the different information labels described below.
In addition to the full-screen display shown in Figure l-2, a split display is available, as
described in the "Making Measurements" chapter. In the split display mode, the analyzer
provides information labels for each half of the display.
Several display formats are available for different measurements, as described under "I=)"
in the "Key Deli&ions" chapter.
Stimulus start value. This value could be any one of the following:
1.
The lower power value in power sweep
n
When the stimulus is in center/span mode, the center stimulus value is shown in this
space. The color of the stimulus display reflects the current active channel.
HP 87190/2001220 Description and Options