Saving and Recalling Power Meter States
To reduce repeated setup sequences, you can save a maximum of ten
power meter states in the non- volatile memory.
The save/recall functions are part of the Sys/Inputs menu, accessed by
pressing the
To save a measurement setup:
1 Press
Figure 2-37 Save/Recall screen
2 Using the
3 The power meter prompts you to press
Figure 2-38 Save confirm pop-up
N1913/1914A EPM Series Power Meters User's Guide
key.
Save/Recall
,
Figure 2-
37.
and
displayed list. To change the name of a register - See
"Editing a Register's Name," starting on page 76, otherwise press
General Power Meter Functions
to display the Save/Recall screen as shown in
keys, select an available name from the
Confirm
Chapter
2,
Save
to proceed.
2
.
75