Agilent Technologies 8719D User Manual page 581

Error Number You can only make a D2/Dl measurement if both channels are on.
130
Error Number You can only make a D2/Dl measurement if both channels have the same
152 number of points
DEADLOCK
Error Number A fatal flrmware error occurred before instrument preset completed. Call your
111 local Hewlett-Packard sales and service office.
Error Number Demodulation was selected when the analyzer was not in CW time mode.
17 Select demodulation only after putting the analyzer into CW time mode.
Error Number The device at the selected address cannot be accessed by the analyzer. Verify
119 that the device is switched on, and check the HP-IB connection between the
analyzer matches the HP-IB address set on the device itself.
DIRECTORY FULL
Error Number There is no room left in the directory to add liles. Either delete files or get a
188 new disk.
DISK HARDWARE PROBLEM
Error Number The disk drive is not responding correctly. Refer to the
39
Network Anulgzer
external disk drive, refer to the disk drive operating manual.
HP 8719D/2OD/22D