Agilent Technologies 8719D User Manual page 589

NO MARKER DELTA -SPANNOT SET
Error Number You must turn the delta marker mode on, with at least two markers displayed,
15
in order to use the .EIAXl%lt ->
NO MEMORY AVAILABLE
Error Number You cannot perform interpolated error correction due to insufficient memory.
123
NO MEMORY AVAILABLE FOR SEQUENCING
Error Number You cannot modify the sequence due to insufficient memory.
126
NO SPACE FOR NEW CAL. CLEAR REGISTERS
Error Number You cannot store a calibration set due to insufficient memory. You can free
70
more memory by clearing a saved instrument state from an internal register
(which may also delete an associated calibration set, if ah the instrument states
using the calibration kit have been deleted.) You can store the saved
instrument state and calibration set to a disk before clearing them. After
deleting the instrument states, press w to nm the memory packer.
NOT ALLOWED DURING POWER METER CAL
Error Number When the analyzer is performing a power meter calibration, the HP-IB bus is
198 unavailable for other functions such as printing or plotting.
NOT ENOUGH SPACE ON DISK FOR STORE
Error Number The store operation will overflow the available disk space. Insert a new disk or
44 purge hles to create free disk space.
NO VALID MEMORY TRACE
Error Number If you are going to display or otherwise use a memory trace, you must first
54
store a data trace to memory.
1 O-1 6 Error Messages
FOR INTERPOLATION