Agilent Technologies 8719D User Manual page 497

initializes media in external drive, and formats the disk using
the selected (DOS or LIF) format.
clears all internal save registers and associated cal data and
memory traces.
(Option 089 only) leads to the frequency offset menu.
(Option 089 only) switches the frequency offset mode on and
O f f .
specifies the frequency of a calibration factor or loss value in
the
power meter cal loss/sensor lists.
blanks the displayed frequency notation for security purposes.
Frequency labels cannot be restored except by instrument
preset or turning the power off and then on.
provides access to the series of menus used to perform a
complete calibration for measurement of all four S-parameters
of a two-port device. This is the most accurate calibration for
measurements of two-port devices.
the normal full-size scale selection for plotting on blank paper,
and includes space for all display annotations such as marker
values, stimulus values, etc. The entire display fits within the
maintaining the exact same aspect ratio as the analyzer display.
measures the forward isolation of the calibration standard.
lets you enter a label for the forward match class. The label
appears during a calibration that uses this class
specifies which standards are in the forward match class in the
calibration kit.
is used to enter the standard numbers for the forward match
(thru) calibration. (For default kits, this is the thru.)
lets you enter a label for the forward transmission class. The
label appears during a calibration that uses this class
specifies which standards are in the forward transmission class
in the calibration kit.
measures the forward frequency response in a two-port
calibration.
displays the complex admittance values of the active marker in
rectangular form. The active marker values are displayed in
terms of conductance (in Siemens), susceptance, and equivalent
capacitance or inductance. Siemens are the international units
of admittance, and are equivalent to mhos (the inverse of
ohms). The Smith chart graticule is changed to admittance
form.
(Option 010 only) turns gating on or off in time domain mode.