Agilent Technologies 8719D User Manual page 521

940 Key Definitions
makes scale per division the active function. A menu is
displayed that is used to modify the vertical axis scale and
the reference line value and position. In addition this menu
provides electrical delay offset capabilities for adding or
subtracting linear phase to maintain phase linearity.
searches the trace for the next occurrence of the target value
to the left.
searches the trace for the next occurrence of the target value
to the right.
moves the active marker to the maxinuun point on the trace.
moves the active marker to the minimum point on the trace.
turns off the marker search function.
specifies which limit segment in the table is to be modified.
A maximum of three sets of segment values are displayed at
one time, and the list can be scrolled up or down to show
other segment entries. Use the entry block controls to move
the pointer > to the required segment number. The indicated
then
segment can be edited or deleted. If the table of limits is
. . . . . . : : . . . - i . . i . . ; ; . : . . . . : . . . .
sets the center frequency of a subsweep in a list frequency
sweep.
sets the frequency or power span of a subsweep about a
specified center frequency.
sets the start frequency of a subsweep.
sets the stop frequency of a subsweep.
leads to the select quadrant menu, which provides the
capability of drawing quarter-page plots. This is not used for
printing.
The active entry area displays the letters of the alphabet, digits
0 through 9, and mathematical symbols. 'Ib define a title, rotate
the knob until the arrow t points at the first letter, then press
for a maximum of 50 characters. As each character is selected,
it is appended to the title at the top of the graticule.
prompts the analyzer to run a series of tests to determine a
problem.
accesses a series of sequencing menus. These allow you to
create, modify, and store up to 6 sequences which can be run
automatically.
activates editing mode for the segment titled "SEQl" (default
title).
activates editing mode for the segment titled "SEQZ" (default
title).