Input Ports Menu - Agilent Technologies 8719D User Manual

Figure 6-10. Reflection Impedance and Admittance Conversions
In a transmission measurement, the data can be converted to its equivalent series impedance or
admittance using the model and equations shown in Figure 6-l 1.
Avoid the use of Smith chart, SWR, and delay formats for display of Z and Y
Note
conversions, as these formats are not easily interpreted.
Ports Menu
Input
This menu is allow you to deilne the input ports for power ratio measurements, or a single
input for magnitude only measurements of absolute power. You cannot use single inputs for
phase or group delay measurements, or any measurements with averaging activated.