If You Are Using A Color Printer - Agilent Technologies 8719D User Manual

exchange by setting the electrical voltage on one line of the RS-232 serial cable.
Because the RTR+&$R handshake takes place in the hardware rather than the
Note
Defining a Print Function
The print definition is set to default values whenever the power is cycled.
Note
However, you can save the print definition by saving the instrument state.
Laser printers and some DeskJet printers do not begin to print until a full page,
Note
or a partial page and a form feed, have been received.

If You Are Using a Color Printer

2. If you want to modify the print colors, select the print element and then choose an available
color.
You can set all the print elements to black to create a hardcopy in black and
Note
white.
Since the media color is white or clear, you could set a print element to white if
you do not want that element to appear on your hardcopy.
. . . . ' . . . . . . :.:...:'
. . . . . .
P r i n t i n g , P l a t t i n g , a n d S a v i n g M e a s u r e m e n t R e s u l t s