Reflection Response in Time Domain
The time domain response of a reflection measurement is often compared with the time
domain reflectometry (TDR) measurements. Like the TDR, the analyzers measure the size of
the reflections versus time (or distance). Unlike the TDR, the time domain capability of the
analyzers allows you to choose the frequency range over which you would like to make the
measurement.
1. 'lb choose the measurement parameters, press:
2. Perform an SI1 l-port correction on PORT 1. Refer to Chapter 3, "Optimizing Measurement
Results," for a detailed procedure.
Connect your device under test as shown in F'igure 2-62.
3.
Figure Z-62. Device Connections for Reflection Time Domain Example Measurement
M e a s u r e m e n t s
2 - 8 3