Enable Or Disable Le Servers Redundancy - 3Com CoreBuilder 9000 User Manual

238 C 9: M
HAPTER ANAGING
Enable or Disable LE
Servers Redundancy
LAN E
MULATION
Enable and disable the LECS-based LANE redundancy facility in the
CoreBuilder 9000 ATM Enterprise Switch. For more information, see
"Redundant LANE Services" on page 392.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
Enable/disable
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 5 4 2 0
The following message is displayed:
Redundancy mode changed.
The LECS-based LANE redundancy facility in the CoreBuilder 9000 ATM
Enterprise Switch is disabled
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(4) RDN: LE Service redundancy setup
(2) LRM: Change LES redundancy Mode
Format or Range
0 to disable
1 to enable
[parameters]
1 1 5 4 2
The LECS-based LANE redundancy facility in the
CoreBuilder 9000 ATM Enterprise Switch is enabled or
disabled.
Redundancy mode changed.
.