3Com CoreBuilder 9000 User Manual page 288

288 C 9: M
HAPTER ANAGING
LAN E
MULATION
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
Response policy
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 2 3 1 5 2 1
The following messages are displayed:
LE arp policy was set.
LE arp policy was successfully saved on flash.
The LE_ARP policy of the ELAN with ELAN ID 2 is updated to Respond.
(2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Information
(1) LSU: LES Setup
(5) SAR: Set & Save LE arp policy
Format or Range
1–16
For more information, see "Display ELAN Parameters in
LES Database" on page 278.
1-Respond
2-Forward Request
(For more information, see Table 38 LE_ARP
Verification Policies.)
2 2 3 1 5 [parameters]
The response policy for the specified ELAN is updated.
The update takes place immediately.
LE arp policy was set.
LE arp policy was successfully saved on
flash.