Release Pvc Destination; Reo: Release Out Vc From Call - 3Com CoreBuilder 9000 User Manual

176 C 7: C
HAPTER ONFIGURING
Release PVC
Destination
V C
IRTUAL HANNELS
Release a single destination connection (branch) from a
point-to-multipoint call. Specify the P2M call number and the output port
number and VPI/VCI of the destination connection.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Call number of the P2M
connection
Destination connection
port number
Destination connection
VPI
Destination connection
VCI
Direct access sequence:
Command Result
System action taken:
System message display:
(4) S&C: Setup of Connections and ATM
Addresses
(1) PVC: PVCs Setup
(1) GET: Display VPI/VCI Limits

(6) REO: Release Out VC from call

Format or Range
Integer. See (3)CON\(2)RTG\(1)CLL to get Call
numbers for a port.
<slot.group.port>
See (3)CON\(2)RTG\(1)CLL
See (3)CON\(2)RTG\(1)CLL
3 4 1 1 6 [parameters]
A PVC call destination with parameters specified is
released.
A message is displayed as shown in the example.