Display Static Address Port Connection; Stc: Static Addresses - 3Com CoreBuilder 9000 User Manual

Table 21 Port SVC Connection Parameters (continued)
Name
Originator
CLP
Display Static Display a connection relating to a specific VPI/VCI of the port or all
Address Port connections (all VPI/VCI) of the port. The connections involve virtual
Connection channels created between static addresses defined by LMA.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port number
VPI
VCI
Direct access sequence:
Command Result
System action taken:
System message display:
Description
Specifies if the connection is originated at the calling UNI or
the called UNI.
Specifies the action which is to be performed on the CLP
bit. The possible values are: clear bit (0), set bit (1), or no
change (N).
(3) PRT: ATM ports

(2) STC: Static addresses

Format or Range
<slot.group.port>
or enter A for all VPI values
or enter any value for all VPI values
3 3 2 [parameters]
The connection information for the specified port is
displayed.
Information is displayed as shown in the example.
Display Port Connections 165