Enable Lan Emulation Services - 3Com CoreBuilder 9000 User Manual

228 C 9: M
HAPTER ANAGING
Enable LAN
Emulation Services
LAN E
MULATION
Enable the LAN Emulation services in the CoreBuilder 9000 ATM
Enterprise Switch. The enable takes place after the next reboot.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 5 1 2
The following message is displayed:
LE srv status is already set to ENABLE on the next reboot.
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(1) LES: LE services setup
(2) ELS: Enable services
1 1 5 1 2
The LE services status is enabled after the next reboot.
LE srv status is already set to ENABLE
on the next reboot.