Disable Lan Emulation Services - 3Com CoreBuilder 9000 User Manual

Disable LAN
Emulation Services
Disable the LAN Emulation services in the CoreBuilder 9000 ATM
Enterprise Switch. The disable takes place after the next reboot.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 5 1 3
The following message is displayed:
LE service status will be DISABLED on the next reboot.
LAN Emulation Services Setup
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(5) SLE: LE setup
(1) LES: LE Services setup
(3) DLS: Disable LE services
1 1 5 1 3
The LE services are disabled after the next reboot.
LE service status will be DISABLED on
the next reboot.
229