Reset Interface Card
Reset the interface module in a specific slot, or all the interface modules.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Enter a parameter at the prompt
Parameter
Slot Number
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 5 8
0
The following prompt is displayed:
Do you really want to reset all the interface cards (Y/N)?
Enter
to confirm. The following message is displayed:
y
The interface card was reset.
Configuring Interface Modules
(5) IFC: Interface Cards
(8) RST: Reset Interface Card
Format or Range
1 - 16 or 0 for all
1 5 8 [parameters]
The selected interface module is reset.
The interface card was reset.
109