3Com CoreBuilder 9000 User Manual page 164

164 C 7: C
HAPTER ONFIGURING
Connection number:
Call number:
Port:
Connection type:
Connection VPI:
Connection VCI:
Operational status:
Administration status:
Time of last change of operational state:
Originator:
CLP:
V C
IRTUAL HANNELS
Example — Display Info for a Connection at a Port
Enter:
3 3 1 1.1.1 3 200
The information for the connection 0/46 at port 1.1.1 is displayed.
Port SVC Connection Parameters
Table 21 shows the port SVC connection parameters displayed by the
command.
Table 21 Port SVC Connection Parameters
Name
Connection number
Call number
Port number
Member number
Connection Type
Connection VPI
Connection VCI
Operational Status
Administration Status
(continued)
Description
Number identifying the connection (VPI/VCI).
Number identifying the call.
Number identifying the port.
Sequential numbering of ATM addresses registered at a
port. Used to specify SVC.
The connection type specifies whether the connection is
using SVC or PVC, and if it is a point-to-point (P2P) or
point-to-multipoint (P2M) call.
The Virtual Path Identifier (VPI) value defined for the
specific port.
The Virtual Channel Identifier (VCI) value defined for the
specific port.
Specifies the operational status of the connection, active or
not.
Specifies the administration status of the connection (active
or not).
1
1
PVC,P2P
3
200
Active
Active
655350 msec
Calling
N