Update Write-Access Password; Wri: Set Write-Access Password - 3Com CoreBuilder 9000 User Manual

62 C 5: C
HAPTER ONFIGURING THE
Update Write-access
Password
P
LATFORM
Update the write-access password. Enter the new password a second
time to confirm your entry.
To accept the default password, press Enter.
Command Actions
.
Enter menu sequence:
Enter a parameter at the prompt
Parameter
New password
New password
confirmation
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 1 2
The following dialog is displayed. Note that the passwords themselves are
not displayed.
Enter the new write password: mypassw
Enter the new write password again: mypassw
The password has been changed.
The write-access password is updated.
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(1) PAS: Password Setup

(2) WRI: Set Write-access Password

Format or Range
0 to 8 alphanumeric characters
Enter the password exactly as you did before.
1 1 1 2 [parameters]
The write-access password is updated.
The password has been changed.