Acsei Client Configuration Commands On The Osn|M; Acsei-Client Debug Disable; Acsei-Client Debug Enable - 3Com 5500G Configuration And Command Reference Manual

Switch open services networking

Hide thumbs Also See for 5500G:

Table of Contents

Syntax

View

Parameters

Description

Examples

Syntax

View

7 ACSEI Client Configuration

Commands on the OSN|M

You can execute the following commands in any directory of the Linux

system. You can use the osm connect unit command in the switch's user

view to enter the OSN|M's Linux system. For description of the osm

connect unit command, refer to "osm connect unit" on page 31.

acsei-client debug disable

Any directory of the Linux system

None

Use the acsei-client debug disable command to disable debugging for

the ACSEI client.

By default, debugging for the ACSEI client is disabled.

# Disable debugging for the ACSEI client on unit 1.

<SW5500G> osm connect unit 1

Connected to OSM!

[root@localhost ~]# acsei-client debug disable

acsei-client debug enable

Any Linux system directory

Table of Contents

Chapters

Table of Contents