Download System Software By Serial Port; Lcl: Prepare For Local Rs232 Download - 3Com CoreBuilder 9000 User Manual

Download System
Software by Serial
Port
Prepare for local software download via RS-232 serial port. There are two
load modes: load and operational. See Appendix B for the full RS-232
serial port software download procedure.
Table 12 describes the load modes that can be requested by the
command.
Table 12 Load Modes
Load Mode Description
Load Prepares the CoreBuilder
Switch for the software download via the RS-232 port.
After the reboot, the Switch changes to the waiting
state for the download utilities via RS-232.
Operational Returns the CoreBuilder 9000 ATM Enterprise Switch
to run after any reboot.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Enter a parameter at the prompt
Parameter
Load mode
Operational Mode
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 3 3 1
The following message is displayed:
Loading system software from LMA port on the next reboot.
The system software will be loaded from the LMA port upon reboot.
Downloading System Software
®
9000 ATM Enterprise
(3) LOA: Load System Software
(3) LCL: Prepare for Local RS232
Download
Format or Range
1 - Load Mode
0 - Operational Mode
1 3 3 [parameters]
System is ready for RS-232 software download.
Loading system software from LMA port
on the next reboot.
91