Update Elan Parameters In Lecs Database; Eet: Edit Elan Type & Params; Efp: Les Edit Elans Parameters - 3Com CoreBuilder 9000 User Manual

Update ELAN
Parameters in LECS
Database
Update the parameters for the specified ELAN in the LECS database. (For
more information, see Table 30 for a description of the ELAN parameters
that you can update.)
CAUTION: After you update the parameters of an ELAN in the LECS
database, you must use the LMA to update the parameters of the ELAN
in the LES database in exactly the same way. (For more information, see
"Update ELAN Parameters in LES Database" on page 281.)
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN name
ELAN type
ELAN max frame size
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 1 5 3 elan69_14 1 1
The following prompt appears:
elan type is 1, max frame size is: 1
Are you sure (y/n): y
Enter to confirm,
Y N
elan69_14 are updated.
LECS ELAN Database Operations
(2) LEM: LAN Emulation
(1) LCS: LE Configuration Services
(5) LNT: LECS Network topology
(3) EET: Edit ELAN type & params
Format or Range
Up to 32 characters. (For more information, see
"Display ELANs" on page 245.)
1 – Ethernet
2 – Token ring
3 – VLT
1 – 1516
2 – 4544
2 1 5 3 [parameters]
The parameters for the specified ELAN are updated.
The update takes place immediately.
elan type is <n>, max frame size is
<n>:
to cancel reset. The parameters of the ELAN
249