Downloading Software; Software Download/Upgrade Facility - 3Com CoreBuilder 9000 User Manual
Atm enterprise switch
Hide thumbs
Also See for CoreBuilder 9000:
- Getting started manual (78 pages) ,
- Device view user manual (52 pages) ,
- Installation manual (33 pages)
Table of Contents
Advertisement
B
Software
Download/Upgrade
Facility
D
OWNLOADING
This chapter describes the procedure to download the software for the
ATM Switch Fabric Module, the ATM Interface Module, and the Monitor.
It covers the following topics:
Software Download/Upgrade Facility
RS-232 Upgrade Instructions
TFTP Upgrade Instructions
Downloading the Software to the Standby Switch Fabric Module
Verifying TFTP Download Status
You can use the software upgrade facility to download the software that
you need to get the CoreBuilder
functioning normally. You can upgrade this software as needed. Consult
your local 3Com representative for information about upgrading the
software.
You can download three CoreBuilder 9000 software units:
ATM Switch Fabric Module Software
ATM Interface Module Software
Monitor Software
See the Release Notes to determine which software units to download for
the current upgrade.
You can download the software using one of the following methods:
Download by RS-232 serial port using a local PC terminal
Download by TFTP (Trivial File Transfer Protocol)
S
OFTWARE
®
9000 ATM Enterprise Switch
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the CoreBuilder 9000 and is the answer not in the manual?