Display Le Service Redundancy - 3Com CoreBuilder 9000 User Manual

Display LE Service
Redundancy
Display parameters of the LES redundancy facility in the CoreBuilder 9000
ATM Enterprise Switch. For more information, see "Redundant LANE
Services" on page 392.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 5 4 1
The following information is displayed:
LANE Service redundancy mechanism
Startup Delay (Sec)
LES Redundancy Parameters
.
Table 28 LES Redundancy Parameters
Name
LANE Service Redundancy Status
Startup Delay
LAN Emulation Redundancy Setup
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(4) RDN: LE Service redundancy setup
(1) DLR: Show LES redundancy params
1 1 5 4 1
The LES redundancy parameters are displayed.
Information is displayed as shown in the example.
: 600
Description
Whether LANE service redundancy is enabled
or disabled.
Time elapsed between switch startup and
startup of LANE redundancy facility — in
seconds. Default is 600.
237
: Enabled