Display Port Connections; Display Ume Address Port Connection; Prt: Atm Ports (1) Ume: Ume Addresses - 3Com CoreBuilder 9000 User Manual

162 C 7: C
HAPTER ONFIGURING
Display Port
Connections
Display UME Address
Port Connection
V C
IRTUAL HANNELS
You can display the port ATM connections.

Display UME Address Port Connection

Display Static Address Port Connection


Display Inactive Address Port Connections
For information about establishing port connections, see "External Links
— ATM Connections" on page 351.
Displays information about connections defined at a specific port. Specify
the connection by specifying VPI/VCI values. The connections belong to
virtual channels created dynamically between UME ATM addresses.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port number
VPI
VCI
Direct access sequence:
Command Result
System action taken:
System message display:
(3) PRT: ATM ports
(1) UME: UME addresses
Format or Range
<slot.group.port>
or enter A for all VPI values
or enter any value for all VPI values
3 3 1 [parameters]
The connection information for the specified port is
displayed.
Information is displayed as shown in the examples.