Access Methods
The CoreBuilder 9000 ATM Enterprise Switch can implement the SNMP
agent in two ways:
Use the LMA to configure the CoreBuilder 9000 ATM Enterprise Switch's
IP address, subnet mask, NMS IP address, and the default gateway via the
LMA to enable access to the SNMP agent. See the CoreBuilder 9000 ATM
Switch Fabric Module Getting Started Guide for additional configuration
information.
Security
SNMP security is currently provided through configurable community
strings.
Figure 31 SNMP Manager (Transcend ATM Manager)
Out-of-band via the Ethernet port
In-band over LAN Emulation via one of the ATM ports
SNMP Agent
417