Delete Atm Address By Member Id; Del: Delete Atm Address - 3Com CoreBuilder 9000 User Manual

142 C 6: M
HAPTER ANAGING
Delete ATM Address
by Member ID
N I
ETWORK NTERFACES
Delete the ATM address from the list of registered ATM addresses at a
port. The address is deleted from the MIB at the port; in other words, it is
de-registered. Specify the ATM address by its member ID. For a list of
addresses registered by LMA together with their member IDs, see
"Display Static ATM Addresses at Port" on page 136.
Only ATM addresses created via LMA can be deleted.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
ATM address member
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 4 2 3 11101
The following message is displayed:
ATM address member 11101 was deleted from port 1.1.1.
The ATM address with member number 11101 is deleted from the MIB at
port 1.1.1.
(4) S&C: Setup and Config Connections
(2) STP: Static ATM Addresses Setup

(3) DEL: Delete ATM Address

Format or Range
<slotgroupport0n>
3 4 2 3 [parameters]
The specified ATM address is deleted from specified
port.
ATM address member <n> was deleted from
port <x.x.x>