Reset Counters Per Vpi/Vci; Rvp: Reset Counters Per Vpi/Vci - 3Com CoreBuilder 9000 User Manual

214 C 8: V
HAPTER IEWING
Reset Counters Per
VPI/VCI
S
TATISTICS
Resets the statistics counter for total cells through a connection. For more
information, see "ATM-Layer Statistics" on page 209.
Command Actions
Enter the menu sequence: (4) STS: Statistics
Enter a parameter at the prompt
Parameter
Port number
VPI
VCI
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
4 2 5 1.1.1 a a
The following messages are displayed:
Reset all VPI/VCI counters may take a few seconds....
Reset VPI/VCI counters completed successfully.
The counters are reset.
(2) ATM: ATM layer

(5) RVP: Reset counters per vpi/vci

Format or Range
<slot.group.port>
Perform menu item (3) CON\ (2) RTG\ (1)
CLL to get the VPI/VCI values for a call, or A for all
values.
Perform menu item (3) CON\ (2) RTG\ (1)
CLL to get the VPI/VCI values for a call, or A for all
values.
4 2 5 [parameters]
The statistics counter for cells through a connection is
reset
Reset VPI/VCI counters completed
successfully.