Configuration Flash Status; Fls: Configuration Flash Status - 3Com CoreBuilder 9000 User Manual

112 C 5: C
HAPTER ONFIGURING THE
Configuration Flash
Status
P
LATFORM
Show status of the configuration flash. When you change the
configuration of the CoreBuilder 9000 ATM Enterprise Switch, the new
configuration is stored in the configuration flash. This command indicates
when the new configuration has been successfully stored.
Before you power cycle (turn off and on) the Switch, make sure that the
configuration flash has been updated.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 6
The following message is displayed:
Configuration flash is up-to-date.

(6) FLS: Configuration Flash Status

1 6
Displays configuration flash status
Configuration flash is up-to-date.