3Com CoreBuilder 9000 User Manual page 23

Table 3 explains the command descriptions presented above:.
Table 3 Command Description Sections
Key Section
A Menu sequence
B Parameters
C Direct Access
Sequence
D System Action
Description
The menu options that you select to execute the
command, including all the levels and sublevels.
The parameters to enter after the menu sequence
and the format to use. If no parameters are
necessary, this section does not appear in the
command description.
The command sequence to enter at the prompt to
run the command without going through all the
sublevels. The direct access sequence can also
include the command parameters.
The action that the system takes after you enter the
command.
Conventions 23