278
C
9: M
HAPTER
ANAGING
ELAN Parameters
Display ELAN
Parameters in LES
Database
LAN E
MULATION
You can configure the ELAN parameters, as follows:
Display ELAN Parameters in LES Database
Update ELAN Parameters in LES Database
Display general information about the 16 ELANs in the CoreBuilder 9000
ATM Enterprise Switch. The information is taken from the LES database.
(For more information about parameters in the LECS database, see
"Display ELAN Parameters in LECS Database" on page 247.)
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
(2) LEM: LAN Emulation
(2) LES: LE Service
(2) GEN: ELANs General Info
2 2 2
The ELAN information specified in Table 35 is
displayed.
Information is displayed as shown in the example.