Upload Switch/Lane Configuration; Tcu: Perform Tftp Configuration Upload - 3Com CoreBuilder 9000 User Manual

92 C 5: C
HAPTER ONFIGURING THE
Upload Switch/LANE
Configuration
P
LATFORM
Upload the Switch configuration or LANE database configuration from
the CoreBuilder 9000 ATM Enterprise Switch to an external host. Specify
the server IP address and the target configuration file name.
Command Actions.
Enter the menu sequence: (1) SYS: Platform Configuration
Enter a parameter at the prompt
Parameter
Configuration type
Server IP address
Configuration file name
Direct access sequence:
Command Results
System action taken:
System message display:
Example
Enter:
1 3 4 1 151.104.21.147 cfgtest.cfg
The following prompt is displayed:
Start upload to 151.104.21.147, cfgtest.cfg (Y/N)? y
The following message is displayed:
Upload process started...
The configuration is uploaded to the host.
(3) LOA: Load System Software
(4) TCU: Perform TFTP Configuration
Upload
Format or Range
1 - Switch Configuration
2 - LANE Configuration
Valid IP address
Name of the target configuration file
1 3 4 [parameters]
The configuration is uploaded to the external host.
Upload process started...