Update Elan Les-Bus Address - 3Com CoreBuilder 9000 User Manual

Update ELAN LES-BUS
Address
Update the LES address of the specified ELAN. Enter the LES address user
part, which consists of 6 bytes separated by dots. The last byte is a
selector byte (0-F) that signifies the sequential identifier of the LES in the
CoreBuilder 9000 ATM Enterprise Switch.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
ATM Address
Direct access sequence:
Command Result
System action taken:
Example
Enter:
2 2 3 1 1 2 c0.da.60. 0.49. 0
The LES-BUS ATM addresses for the ELAN with ELAN ID #2 are updated.
(2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Info
(1) LSU: LES Setup
(1) ADR: Set & save LES-BUS address
Format or Range
The ELAN ID number, 1–16
6 bytes of user part, separated with dots
2 2 3 1 1 [parameters]
The LES-BUS ATM addresses for the specified ELAN are
updated. The update takes place immediately.
LES Address 277