Reset Signaling
Resets the signaling counters for a specified port.
Counters
Command Actions
Enter the menu sequence: (4) STS: Statistics
Enter a parameter at the prompt
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The following message is displayed:
Reset Q93B statistics completed successfully.
The signaling statistics are reset for port <1.1.1>.
Parameter
Port ID
4 5 2
1.1.1
Signaling Protocol Statistics
(5) SIG: Signaling
(2) RST: Reset signaling counters
Format or Range
<slot.group.port>
4 5 2 [parameters]
Signaling statistics are reset for the specified port.
Reset Q93B statistics completed
successfully.
223