Update Startup Delay - 3Com CoreBuilder 9000 User Manual

Update Startup Delay

Update the startup delay parameter for LANE redundancy facility in the
CoreBuilder 9000 ATM Enterprise Switch. The startup delay is the time
elapsed between the switch startup and the startup of the LANE
redundancy facility.
To display the current value of the parameter, see "Display LE Service
Redundancy" on page 237. This parameter is in the range 1–15 minutes
and defaults to 10 minutes. For more information about the startup
delay, see "LANE Redundancy Start-up Delay" on page 399.
The startup delay takes effect at the next reboot.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
Startup Delay
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 5 4 3 600
The following message is displayed:
Startup Delay Changed.
The startup delay for the LANE redundancy facility in the
CoreBuilder 9000 ATM Enterprise Switch is set to 600 seconds
LAN Emulation Redundancy Setup
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(4) RDN: LE Service redundancy setup
(3) LRD: Set LES red. startup delay
Format or Range
Seconds
Default is 600 seconds.
1 1 5 4 3 [parameters]
The startup delay for the LANE redundancy facility is
set for the next reboot.
Startup Delay Changed.
239
.