Display Pvcs; Gep: Display Pvcs - 3Com CoreBuilder 9000 User Manual

178 C 7: C
HAPTER ONFIGURING

Display PVCs

Call Call Call
number type state
----- ------- -------- ----- -- --- ------- ------ ------ ------- ------ ------
2 PVC,P2P Active
V C
IRTUAL HANNELS
Display the PVCs for a specific port and call number.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port number
Call number
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 4 1 1 7 5.1.1 0
The following information is displayed. See Table 23 for more information
about the parameters shown.
Num Pri Cll In conn In
out VPI/VCI conn
cons
1 H N
(4) S&C: Setup of Connections and ATM
Addresses
(1) PVC: PVCs Setup
(1) GET: Display VPI/VCI Limits

(7) GEP: Display PVCs

Format or Range
<slot.group.port>
enter the call number or 0 for all calls
3 4 1 1 7 [parameters]
The PVC information is displayed.
Information is displayed as shown in the example.
In
conn
port mbr
5/200 5.1.1
Out Out Out
conn conn conn
VPI/VCI port mbr
6/ 300 5.2.1