Reset Standby Switch Fabric Module; Rss: Reset Stand-By Switch Module - 3Com CoreBuilder 9000 User Manual

98 C 5: C
HAPTER ONFIGURING THE
Reset Standby Switch
Fabric Module
P
LATFORM
Reset the standby switch fabric module.
Command Actions
Enter the menu sequence: (1) SYS: Platform configuration
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 4 3 1
The following prompt is displayed:
Do you really want to reboot the switch? [y/n] y
The switch is rebooted and following messages are displayed:
Bootstrap V1.10
Moving the file from FLASH to DRAM ....
Going to operational code ....
(4) SWM: Switch modules
(3) SSM: Stand-by Switch Module
(1) RSS: Reset Stand-by Switch
Module
1 4 3 1
The standby switch fabric module is reset.
Information is displayed as shown in the example.
Jul 7 1998
CB9000 3Com NCD
============================