Bridge Trunk Automap Enable/Disable - 3Com 4007 Command Reference Manual

152 C 8: T
HAPTER RUNKING
bridge trunk
autoMap
enable/disable
Layer 2
Switching
Modules
Multilayer
Switching
Modules
(L A )
INK GGREGATION
Provides automatic backplane trunking on the switch fabric modules and
managed switching modules.
Valid Minimum Abbreviation
b t a e
Important Considerations
You can enable or disable the autoMap function on slots.
All trunking is performed through the switch fabric module.
Do not perform backplane trunking through the interface modules.
When you enable autoMap on a module in a specific slot, the switch
fabric module verifies that the switch fabric module and the interface
module's backplane configuration support dynamic backplane
mapping.
When you disable autoMap on a module in a specific slot, the switch
fabric module verifies that the interface module's backplane
configuration is compatible with that of the switch fabric module's
backplane.
Options
Prompt Description
Slot number Slot number to choose to
enable or disable autoMap
function
Possible Values [Default]
One slot number –