3Com CoreBuilder 9000 User Manual page 171

Command Result
System action taken:
System message display:
Example
Enter:
3 4 1 1 2 p2p 0 0 0 5.1.2 1 55 1 5.1.4 0 60
The following message is displayed:
A new PVC was created with call number:
Port Static Connection Parameters
Table 23 shows the port static connection parameter
entered at the prompt.
Table 23 Full PVC Call Parameters
Name
Call Type
Cell Loss level
Priority
First CLP
First Port number
First VPI
First VCI
Second Port number
Second CLP
Second VPI
Second VCI
Create Permanent Virtual Channel (PVC)
A full PVC with the required parameters is created.
A new PVC was created with call number:
<n>
Description
Whether the call defined is point-to-point (P2P) or
point-to-multipoint (P2M)
No default
Threshold for cell based discard
Whether the call cells are transferred through the
®
CoreBuilder 9000 ATM Enterprise Switch to the high
priority queue or low priority queue
Default: Low priority
The setting of the cell loss priority at the input port
The input port slot.group.port
The input port VPI value for the call
The input port VCI value for the call
The output port slot.group.port
The setting of the cell loss priority at the output port
The output port VPI value for the call
The output port VCI value for the call
171
11
that must be
s