3Com CoreBuilder 9000 User Manual page 274

Atm enterprise switch
Hide thumbs Also See for CoreBuilder 9000:
Table of Contents

Advertisement

274
C
9: M
HAPTER
ANAGING
LAN E
MULATION
Redundant LES General Parameters
Table 34 describes the redundant LES general parameters.
Table 34 Redundant LES General Parameters
Parameter
LES ATM Address
Connection State
LES Location
Local LES Instance
Number of Active
Clients
Time since Last Active
Msg
Number of RESET
messages sent to LES
Number of RESET
messages rcvd to LES
Reset LES Allowed
Number of ELANs
attached to LES
Description
The LES ATM address.
The LES connection state. This can be:
Establish
There is a connection between the
LECS and the LES.
Being Established
A connection is being established
between the LECS and the LES.
No Connection
There is no connection between the
LECS and the LES.
The location of the LES. This can be: Internal or External.
Internal
The LES is on the same switch as the
LECS.
External
The LES is not on the same switch as
the LECS.
The Id of the LES on an Internal switch (this is not relevant
for an External switch location).
The number of current active clients (as reported by the
LES).
The time elapsed since the LES stopped being active (in
minutes).
The number of Reset messages sent to the LES by the LECS.
A Reset is attempted to solve split situations
The number of Reset messages actually received by the LES
from the LECS (see above).
The number of Resets to the LES that are allowed (relevant
only for a shared LES).
The number of ELANs that are attached to the LES.

Advertisement

Table of Contents
loading

Table of Contents