Set Management Configuration To Factory Defaults; Mng: Set Management Configuration To Factory Defaults - 3Com CoreBuilder 9000 User Manual

80 C 5: C
HAPTER ONFIGURING THE
Set Management
Configuration to
Factory Defaults
P
LATFORM
Reset the management configuration to the factory defaults for the next
reboot.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 2 8
The following message is displayed:
Management configuration for next reboot were set to
defaults.
The Management Configuration is set to the factory defaults.
(1) SET: Switch Setup
(2) MNG: Management Setup
(8) MNG: Set management configuration
to factory defaults
1 1 2 8
The management configuration is set to the factory
defaults.
Management configuration for next
reboot were set to defaults.