Display Redundant Les General Information; Rlg: Display Redundant Less General Info - 3Com CoreBuilder 9000 User Manual

272
C 9: M
HAPTER ANAGING
Display Redundant
LES General
Information
LAN E
MULATION
Display general information on Redundant LES.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 1 5 9 6
The following information is displayed.
Id STATE
------------------------------------------
0 ESTABLISH
1 ESTABLISH
Redundant LES General Parameters
Table 33 describes the redundant LES general parameters.
Table 33 Redundant LES General Parameters
Parameter
Id
State
Internal/External
(2) LEM: LAN Emulation
(1) LCS: LE Configuration Services
(5) LNT: LECS Network topology
(9) RDN: LE Service redundancy
(6) RLG: Display Redundant LESs
2 1 5 9 6
The general redundant LES information is displayed.
Information is displayed as shown in the example.
Internal / External
INTERNAL
INTERNAL
Description
The LES Id number.
The state of the LES. This can be Establish, Being
Established or No Connection.
The location of the LES. This can be:
Internal The LES is on the same switch as the
LECS.
External The LES is not on the same switch as
the LECS.
general info