Reset Nni Configuration; Nni: Set Nni Configuration To Factory Defaults - 3Com CoreBuilder 9000 User Manual

148 C 6: M
HAPTER ANAGING
Reset NNI
Configuration
N I
ETWORK NTERFACES
Reset the NNI configuration parameters for the CoreBuilder 9000 ATM
Enterprise Switch to their factory default settings. The default setting is
UNI for all ports, and 7 for maximum number of hops.
The reset takes place after the next reboot.
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 3 5
The following prompt is displayed:
Do you really want to reset config? [y/n]
Enter y to confirm. The following message is displayed:
NNI configuration was set to defaults.
The NNI configuration parameters are reset to UNI for all ports.
(1) SET: Switch Setup
(3) NNI: NNI Setup
(5) NNI: Set NNI configuration to
factory defaults
1 1 3 5
The NNI configuration parameters are reset to their
factory default values.
NNI configuration was set to defaults.