3Com CoreBuilder 9000 User Manual page 96

96 C 5: C
HAPTER ONFIGURING THE
P
LATFORM
Switch Fabric Module Parameters
Table 13 describes the switch fabric module parameters displayed by the
command.
.
Table 13 Switch Fabric Module Parameters
Name Description
Slot ID Specifies the slot number in the chassis (slots 8 or 9). The
asterisks (***) that appear before the Slot ID indicate to which
Switch Fabric Module you are connected.
Slot Status Specifies whether or not the slot contains a module, and
whether or not the module is operational. There are three
possible status values:


Occupied: Operational module in slot


Fail: Non-operational module in slot


Free: No module in slot.
Switch Type Specifies the CoreBuilder
Module type


22 x 22 ATM Switch (Module)
Switch Mode Can be:


Initialize


Active (online)


Standby: Inservice (In-Srv STBY)


Standby: Suspend (Suspend STBY)
Memory Size Specifies the memory capacity of the switch:


64MB (extendable to 128 MB or 192 MB)
®
9000 ATM Enterprise Switch Fabric