Display Static Atm Addresses At Port - 3Com CoreBuilder 9000 User Manual

136 C 6: M
HAPTER ANAGING
Display Static ATM
Addresses at Port
N I
ETWORK NTERFACES
Display static ATM addresses registered for the specified port. This
command includes ATM addresses that have been entered manually via
LMA or learned addresses over Network-to-Network Interface (NNI)
connection (E-IISP). This command also displays member IDs for each
ATM address registered at the port.
Note that, similar to ILMI registration, each port can have multiple ATM
addresses.
For more information, see "Display User Management Entities (UME)
ATM Addresses at Port" on page 132.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
(1) ADD: Get ATM Addresses
(2) STC: Get Static and NNI Address
at Port
Format or Range
<slot.group.port> (0.0 for all ports)
3 1 2 [parameters]
All ATM addresses registered for the specified port are
displayed.
Information is displayed as shown in the example.