Lecs Address; Display Resident Lecs Address; Lcs: Le Config Service (1) Lga: Get Resident Lecs Address - 3Com CoreBuilder 9000 User Manual

240 C 9: M
HAPTER ANAGING
LAN E
MULATION
O
PERATIONS

LECS Address

Display Resident LECS
Address
LECS ADDR is:
LAN E
MULATION
C
ONFIGURATION
You can configure the resident LECS address as follows:

Display Resident LECS Address

Update Resident LECS Address
CAUTION: Before you reboot the switch, wait three minutes after each
LECS update operation to allow the change to be stored in flash.
Display the address of the resident LECS.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 1 1
The following information is displayed. The first 13 bytes represent the
network prefix of the CoreBuilder 9000 ATM Enterprise Switch and the
last 7 bytes represent the user part.
47.0.0.0.0.0.3c.0.0.a0.0.0.0.0.a0.3e.0.0.1.0
S (LECS)
ERVICE
(2) LEM: LAN Emulation
(1) LCS: LE Config Service
(1) LGA: Get resident LECS address
2 1 1
The address of the resident LECS is displayed.
Information is displayed as shown in the example.