Update Nms Address; Sns: Set Nms Address - 3Com CoreBuilder 9000 User Manual

Update NMS Address

Update the NMS IP address where the CoreBuilder 9000 ATM Enterprise
Switch sends the event traps. The factory default NMS address is
.
255.255.255.255
The NMS IP address is changed after the next reboot
Command Actions
Enter the menu sequence: (1) SYS: Platform Configuration
Enter a parameter at the prompt
Parameter
NMS address
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 2 2 2 100.1.0.131
The following message is displayed:
NMS address was successfully set for the next reboot.
The NMS address is updated to 100.1.0.131.
Setting Up for Management
(1) SET: Switch Setup
(2) MNG: Management Setup
(2) NMS: NMS Setup

(2) SNS: Set NMS Address

Format or Range
Valid IP address
1 1 2 2 2 [parameters]
The NMS address is updated.
NMS address was successfully set for
the next reboot.
69