Delete All Inactive Addresses; Res: Reset Saved Addresses - 3Com CoreBuilder 9000 User Manual

144 C 6: M
HAPTER ANAGING
Delete All Inactive
Addresses
N I
ETWORK NTERFACES
Table 19 Parameters (continued)
Name Description
Member number The member number provides a sequential numbering of ATM
addresses registered at a port. It is used to specify the
connection.
Man Always set to YES.
Delete all ATM addresses that do not exist for the port but are currently
present in flash memory. These ports are not installed or failed.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Confirm delete
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 4 2 5
The following prompt is displayed:
Delete all inactive addresses from flash!
Are you sure [y/n]
Enter to confirm. The following message is displayed:
y
Delete inactive addresses successfully.
(4) S&C: Setup and Config Connections
(2) STP: Static ATM Addresses Setup

(5) RES: Reset Saved Addresses

Format or Range
y or n
3 4 2 5
All inactive ATM addresses are erased.
Delete inactive addresses successfully.